BAS3005A... Low VF Schottky Diode * Forward current: 0.5 A * Reverse voltage: 30 V * Very low forward voltage (typ. 0.45 V @ IF = 0.5 A) * For low loss, fast-recovery protecting and clamping applications * Pb-free (RoHS compliant) package 1) * Qualified according AEC Q101 BAS3005A-02V Type BAS3005A-02V* Package SC79 Configuration single Marking 2 * Preliminary data Maximum Ratings at TA = 25C, unless otherwise specified Parameter Symbol Diode reverse voltage2) VR 30 V Forward current 2) IF 500 mA 500 mA 3.5 A Average rectified forward current (50/60Hz, sinus) I FAV Repetitive peak forward current I FRM Value Unit (tp 1 ms, D 0.25) Non-repetitive peak surge forward current I FSM 5 (t 10 ms) 150 Junction temperature Tj Operating temperature range T op -55 ... 125 Storage temperature T stg -65 ... 150 C 1Pb-containing 2For package may be available upon special request TA > 25 C the derating of VR and IF has to be considered. 1 2007-04-19 BAS3005A... Thermal Resistance Parameter Symbol Junction - soldering point 1) RthJS Value Unit tbd K/W Electrical Characteristics at TA = 25C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Reverse current2) IR VR = 5 V - - 15 VR = 10 V - - 30 VR = 30 V - - 300 Forward voltage2) IF = 1 mA - 200 260 IF = 10 mA - 260 310 IF = 100 mA - 340 390 IF = 500 mA - 450 500 - 10 15 CT A mV VF AC Characteristics Diode capacitance Unit pF VR = 5 V, f = 1 MHz 1For calculation of RthJA please refer to Application Note Thermal Resistance 2Pulsed test: tp = 300 s; D = 0.01 2 2007-04-19 BAS3005A... Diode capacitance CT = (VR) Reverse current IR = (TA) f = 1MHz VR = Parameter 10 -2 35 A pF 10 -3 IR CT 25 20 10 -4 30 V 20 V 10 V 5V 15 10 10 -5 5 0 0 5 10 15 20 V 10 -6 0 30 25 50 75 C 100 VR 150 TA Reverse current IR = (VR) TA = Parameter Forward Voltage VF = (TA) IF = Parameter 10 -2 0.5 A V 125 C 10 -3 500 mA 0.4 10 -4 VF IR 0.35 85 C 100 mA 0.3 0.25 10 mA 10 -5 0.2 25 C 1 mA 0.15 10 -6 0.1 0.05 10 -7 0 5 10 15 20 V 0 -50 30 VR -25 0 25 50 75 100 C 150 TA 3 2007-04-19 BAS3005A... Forward current IF = (VF) TA = Parameter 10 0 A 10 -1 IF 10 -2 125 C 85 C 25 C - 40 C 10 -3 10 -4 10 -5 10 -6 0 0.1 0.2 0.3 0.4 V 0.6 VF 4 2007-04-19 Package SC79 BAS3005A... Package Outline 0.2 M A +0.05 0.13 -0.03 0.8 0.1 0.2 0.05 10MAX. 1.6 0.1 1 0.3 0.05 Cathode marking 10MAX. 1.2 0.1 A 2 0.55 0.04 0.35 1.35 Foot Print 0.35 Marking Layout (Example) 2005, June Date code BAR63-02V Type code Cathode marking Laser marking Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel o330 mm = 10.000 Pieces/Reel Cathode marking 0.4 0.93 0.2 8 1.96 Reel with 2 mm Pitch 2 1.33 Standard 4 Cathode marking 5 0.66 2007-04-19 BAS3005A... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014 01 a p A P a p A P a p A P 02 b q B Q b q B Q b q B Q 03 c r C R c r C R c r C R 04 d s D S d s D S d s D S 05 e t E T e t E T e t E T 06 f u F U f u F U f u F U 07 g v G V g v G V g v G V 08 h x H X h x H X h x H X 09 j y J Y j y J Y j y J Y 10 k z K Z k z K Z k z K Z 11 l 2 L 4 l 2 L 4 l 2 L 4 12 n 3 N 5 n 3 N 5 n 3 N 5 1) New Marking Layout for SC75, implemented at October 2005. . 6 2007-04-19 BAS3005A... Edition 2006-02-01 Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-04-19